LTPP Logo Long Term Pavement Performance Logo

LTPP TSSC Home

Data User's Corner





LTPP TABLE NAVIGATOR: Field View


Fields for table: INV_PMA_ASPHALT

Field NameCodesData TypeUnitsTest ProtocolDescription
SHRP_ID

VARCHAR2(4)


Test section identification number assigned by LTPP program. Must be combined with STATE_CODE to be unique.
ORIG_ASPHALT_VISCOSITY_140

NUMBER(6)
poise

Viscosity at 140 degrees F.
ORIG_ASPHALT_VISCOSITY_275

NUMBER(6,2)
centistokes

Viscosity at 275 degrees F.
ORIG_PENETRATION_77

NUMBER(3)
.1 mm

Penetration at 77 degrees F.
ORIG_DUCTILITY_77

NUMBER(3)
cm

Ductility at 77 degrees F.
ORIG_DUCTILITY_39

NUMBER(3)
cm

Ductility at 39.2 degrees F.
ORIG_DUCTILITY_TEST_RATE

NUMBER(3)
cm/min

Ductility test rate.
ORIG_PENETRATION_39

NUMBER(3)
.1 mm

Penetration at 39.2 degrees F.
ORIG_RING_BALL_SOFTENING_PT

NUMBER(3)
deg F

Ring and ball softening point.
LAB_AGE_TEST_PROC
LAB_AGE_TEST_PROCNUMBER(1)


Code for procedure used to measure aging effects.
LAB_AGE_TEST_PROC_OTHER

VARCHAR2(40)


Procedure used to measure aging effects if other than those specified.
STATE_CODE
STATE_PROVINCENUMBER(2)


Numerical code for state or province. U.S. codes are consistent with Federal Information Processing Standards.
LAB_VISCOSITY_140

NUMBER(6)
poise

Viscosity at 140 degrees F.
LAB_VISCOSITY_275

NUMBER(6,2)
centistokes

Viscosity at 275 degrees F.
LAB_DUCTILITY_77

NUMBER(3)
cm

Ductility at 77 degrees F.
LAB_DUCTILITY_39

NUMBER(3)
cm

Ductility at 39.2 degrees F.
LAB_DUCTILITY_TEST_RATE

NUMBER(3,1)
cm/min

Ductility test rate at 39.2 degrees F.
LAB_PENETRATION_77

NUMBER(3)
.1 mm

Penetration at 77 degrees F.
LAB_PENETRATION_39

NUMBER(3)
.1 mm

Penetration at 39.2 degrees F.
LAB_RING_BALL_SOFTENING_PT

NUMBER(3)
deg F

Ring and ball softening point.
LAB_WEIGHT_LOSS

NUMBER(2,1)
%

Percent weight loss.
RECORD_STATUS

VARCHAR2(1)


A code indicating the general quality of the data.
CONSTRUCTION_NO

NUMBER(2)


Event number used to relate changes in pavement structure with other time dependent data elements. This field is set to 1 when a test section is initially accepted into LTPP and is incremented with each change to the layer structure.
LAYER_NO

NUMBER(2)


Unique sequential number assigned to pavement layers, starting with layer 1 as the deepest layer (subgrade).
ASPHALT_GRADE
ASPHALTNUMBER(2)


Code indicating grade of asphalt cement.
ASPHALT_GRADE_OTHER

VARCHAR2(40)


Grade of asphalt cement if other than those specified.
SOURCE
REFINERNUMBER(2)


Code indicating the source of the asphalt cement.
SOURCE_OTHER

VARCHAR2(40)


Source of the asphalt cement if other than those specified.
ASPHALT_SPECIFIC_GRAVITY

NUMBER(4,3)


Mean specific gravity of asphalt cement.