LTPP Logo Long Term Pavement Performance Logo

LTPP TSSC Home

Data User's Corner





LTPP TABLE NAVIGATOR: Field View


Fields for table: RHB_ACO_LAB_MIX

Field NameCodesData TypeUnitsTest ProtocolDescription
SHRP_ID

VARCHAR2(4)


Test section identification number assigned by LTPP program. Must be combined with STATE_CODE to be unique.
MARSHALL_STABILITY

NUMBER(4)
lbf

Mean Marshall stability for mixture during laboratory compaction.
NO_BLOWS

NUMBER(2)


Number of blows used to compact AC sample.
MARSHALL_FLOW

NUMBER(4)
.01 in

Mean Marshall flow for mixture during laboratory mix design.
HVEEM_STABILITY

NUMBER(3)


Hveem stabilometer value of specimen.
HVEEM_COHESIOMETER

NUMBER(4)
g/25mm

Hveem cohesiometer value of specimen.
RECORD_STATUS

VARCHAR2(1)


A code indicating the general quality of the data.
VOIDS_MINERAL_AGGR

NUMBER(3,1)
%

Void space between aggregate particles in compacted asphalt concrete, percent.
EFF_ASPHALT_CONTENT

NUMBER(3,1)
%

Calculated effective asphalt content, percent
SUPERPAVE_N_DES

NUMBER(3)


Number of gyrations of compactor used in Superpave mix design.
ASPHALT_GRADE
ASPHALTVARCHAR2(2)


Code for asphalt grade for binder used in mix design.
STATE_CODE
STATE_PROVINCENUMBER(2)


Numerical code for state or province. U.S. codes are consistent with Federal Information Processing Standards.
ASPHALT_GRADE_OTHER

VARCHAR2(40)


Grade of asphalt cement if other than those specified.
PG_HIGH_TEMP

NUMBER(2)


The high temperature grade of performance graded (PG) binders.
PG_LOW_TEMP

NUMBER(2)


The low temperature grade of performance graded (PG) binders.
DATE_COMPLETE

DATE


Date activity was completed.
CONSTRUCTION_NO

NUMBER(2)


Event number used to relate changes in pavement structure with other time dependent data elements. This field is set to 1 when a test section is initially accepted into LTPP and is incremented with each change to the layer structure.
LAYER_NO

NUMBER(2)


Unique sequential number assigned to pavement layers, starting with layer 1 as the deepest layer (subgrade).
MAX_SPEC_GRAVITY

NUMBER(4,3)


Maximum specific gravity used in the asphalt concrete mixture design.
BULK_SPEC_GRAVITY

NUMBER(4,3)


Bulk specific gravity value from mix design.
ASPHALT_CONTENT

NUMBER(3,1)
%

Optimum asphalt content - percent by weight of total mixture.
PERCENT_AIR_VOIDS

NUMBER(3,1)
%

Percent air voids in the mixture.