LTPP Logo Long Term Pavement Performance Logo

LTPP TSSC Home

Data User's Corner





LTPP TABLE NAVIGATOR: Field View


Fields for table: TST_CS02

Field NameCodesData TypeUnitsTest ProtocolDescription
SHRP_ID

VARCHAR2(4)

H17L
Test section identification number assigned by LTPP program. Must be combined with STATE_CODE to be unique.
TENSILE_STRESS

NUMBER(3)
psi
H17L
Tensile stress of the specimen.
DUROMETER_HARDNESS

NUMBER(3)

H17L
Durometer hardness.
BONDING_STRENGTH

NUMBER(3)
psi
H17L
The bonding strength.
TACK_FREE_TIME

NUMBER(3)
min
H17L
Tack free time.
EXTRUSION_RATE

NUMBER(3)
gal/min
H17L
Extrusion rate.
NON_VOLATILE

NUMBER(3)
%
H17L
Percent mass of non-volatile material in the silicone joint sealant.
SPECIFIC_GRAVITY

NUMBER(4,3)

H17L
Specific gravity of the silicone joint sealant material.
MOVEMENT_CAPABILITY
UN_SATISFACTORYVARCHAR2(1)

H17L
Code indicating acceptability of movement capability and adhesion for silicone joint sealants.
OZONE_AND_UV_RESISTANCE
UN_SATISFACTORYVARCHAR2(1)

H17L
Code indicating the acceptability of silicone joint sealants relating to breakdown of the silicon joint sealants when exposed to ozone and ultraviolet light.
TEST_DATE

DATE

H17L
Date the test was performed.
STATE_CODE
STATE_PROVINCENUMBER(2)

H17L
Numerical code for state or province. U.S. codes are consistent with Federal Information Processing Standards.
GENERAL_REMARK

VARCHAR2(40)


Note used to record additional observations regarding the test, or test results.
RECORD_STATUS

VARCHAR2(1)


A code indicating the general quality of the data.
LAYER_NO

NUMBER(2)

H17L
Unique sequential number assigned to pavement layers, starting with layer 1 as the deepest layer (subgrade).
FIELD_SET

NUMBER(2)

H17L
Sequential number indicating the field sampling event. Assigned 1 for first sample event and incremented by 1 for subsequent events.
TEST_NO
TEST_NONUMBER(2)

H17L
Code number indicating sample location.
LOC_NO

VARCHAR2(6)

H17L
Unique code number assigned to each sampling location indicating the sample type. The single character prefix indicates the sample type. The numeric suffix is the unique project location for the sample type.
CONSTRUCTION_NO

NUMBER(2)


Event number used to relate changes in pavement structure with other time dependent data elements. This field is set to 1 when a test section is initially accepted into LTPP and is incremented with each change to the layer structure.
SAMPLE_NO

VARCHAR2(7)

H17L
Unique code number assigned to each material sample indicating the sample type and material type. The first character indicates the sample type. The second character indicates the material type. The numeric suffix is the unique sample number for the sample type and material type.
LAB_CODE
LAB_CODEVARCHAR2(4)

H17L
Code indicating the lab that performed the testing.