LTPP Logo Long Term Pavement Performance Logo

LTPP TSSC Home

Data User's Corner





LTPP TABLE NAVIGATOR: Field View


Fields for table: TST_UG07_SS07_WKSHT_CYCLES

Field NameCodesData TypeUnitsTest ProtocolDescription
SHRP_ID

VARCHAR2(4)

P46
Test section identification number assigned by LTPP program. Must be combined with STATE_CODE to be unique.
CYCLE_NO

NUMBER(1)

P46
Cycle number.
CONSTRUCTION_NO

NUMBER(2)


Event number used to relate changes in pavement structure with other time dependent data elements. This field is set to 1 when a test section is initially accepted into LTPP and is incremented with each change to the layer structure.
LAB_CODE
LAB_CODEVARCHAR2(4)

P46
Code indicating the lab that performed the testing.
SAMPLE_AREA_NO

VARCHAR2(5)

P46
Number used to reference all samples taken from one area of the project - used only for SPS-5, 6, and 7 project.
LAYER_TYPE
LAYER_TYPE_RES_MODNUMBER(1)

P46
Code designating the type of layer.
MR_MATL_TYPE
MR_MATL_TYPENUMBER(1)

P46
Code designating whether the material was coarse or fine grained.
APPLIED_MAX_AXIAL_LOAD

NUMBER(5,1)
N
P46
Actual applied maximum axial load.
APPLIED_CYCLIC_LOAD

NUMBER(5,1)
N
P46
Actual applied cyclic load.
APPLIED_CONTACT_LOAD

NUMBER(4,1)
N
P46
Actual applied contact load.
APPLIED_MAX_AXIAL_STRESS

NUMBER(4,1)
kPa
P46
Actual applied maximum axial stress.
STATE_CODE
STATE_PROVINCENUMBER(2)

P46
Numerical code for state or province. U.S. codes are consistent with Federal Information Processing Standards.
APPLIED_CYCLIC_STRESS

NUMBER(4,1)
kPa
P46
Actual applied cyclic stress.
APPLIED_CONTACT_STRESS

NUMBER(3,1)
kPa
P46
Actual applied contact stress.
DEF_LVDT_1

NUMBER(6,5)
mm
P46
Recoverable axial deformation of the sample for each LVDT.
DEF_LVDT_2

NUMBER(6,5)
mm
P46
Recoverable axial deformation of the sample for each LVDT.
DEF_LVDT_1_2

NUMBER(6,5)
mm
P46
Average of the recoverable axial deformation reported in DEF_LVDT_1 and DEF_LVDT_2.
CORR_VERT_DEF

NUMBER(6,5)

P46
Corrected vertical deformation based on the applicable correction factor.
RES_STRAIN

NUMBER(6,6)

P46
Resilient strain.
RES_MOD

NUMBER(3)
MPa
P46
Resilient modulus.
TEST_DATE

DATE

P46
Date the test was performed.
RECORD_STATUS

VARCHAR2(1)

P46
A code indicating the general quality of the data.
LAYER_NO

NUMBER(2)

P46
Unique sequential number assigned to pavement layers, starting with layer 1 as the deepest layer (subgrade).
TEST_NO
TEST_NONUMBER(2)

P46
Code number indicating sample location.
FIELD_SET

NUMBER(2)

P46
Sequential number indicating the field sampling event. Assigned 1 for first sample event and incremented by 1 for subsequent events.
CON_PRESSURE

NUMBER(4,1)
kPa
P46
Chamber confining pressure.
LOC_NO

VARCHAR2(6)

P46
Unique code number assigned to each sampling location indicating the sample type. The single character prefix indicates the sample type. The numeric suffix is the unique project location for the sample type.
SAMPLE_NO

VARCHAR2(7)

P46
Unique code number assigned to each material sample indicating the sample type and material type. The first character indicates the sample type. The second character indicates the material type. The numeric suffix is the unique sample number for the sample type and material type.
NOM_MAX_AXIAL_STRESS

NUMBER(4,1)
kPa
P46
Nominal maximum axial stress.